Memorial Day Sale!
1-800-680-7921
15
Images
Videos
APR

APR Charge Pipes/Hoses - 2.0T EA888.4 - R/S3 Platform

Fits Audi S3 22-24; VW Arteon 22-24, Golf R 22-24​

Version

Part # MS100220 Be the first to write a review

APR Charge Pipes/Hoses - 2.0T EA888.4 - R/S3 Platform

In Stock
Free Shipping*
MSRP $697.95
$556.95
Save $141.00
Add to Wishlist

Does it fit my vehicle?
7

Emissions

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.

See Emissions Details

Also Bought

The APR Charge Pipes and Charge Hoses System is a comprehensive upgrade for the 2.0T EA888 Gen 4 engine that addresses each component between the turbocharger and intercooler, and from intercooler to throttle body. The system increases air flow through smooth an uninterrupted airflow paths, and provides increased performance and reliability by upgraded each of the factory components. This kit is comprised of five kits otherwise sold on their own.

Features:

  • ---Charge Hoses---
  • Multi-ply silicone hose construction resists swelling and tearing
  • Fluorosilicone interior hose surfaces for oil degradation resistance
  • Strong Clampco T-bolt clamps for a secure high-boost connection
  • EZ-Flow stepped interior lips for a smooth airflow path
  • Black finish
  • ---Charge Pipes---
  • Direct replacement parts
  • Increases performance through smooth airflow paths and reduced boost leak points
  • Strong aluminum pipes that resist cracking and melting like OEM components
  • Removes the turbo muffler for better sound and performance (Turbo Outlet Pipe)
  • Billet aluminum meth/sensor bung with NPT tap (TB inlet pipe)
  • Billet aluminum MAP sensor bungs (TB inlet pipe)
  • Billet aluminum DV mount and recirc path (TB inlet pipe)
  • Removes the restrictive and failure prone throttle body inlet internals (TB inlet pipe)
  • No-slip bead rolled pipe ends
  • TIG welded mounting brackets
  • Full 60mm setup
  • Satin Black Finish
  • Emissions Friendly
Brand APR
CategoryBelts and Cooling
ClampsT-Bolt
Emission Code7
MaterialAluminum, Silicon
Product TypeCharge air hoses and pipes
Sub CategoryHoses and Pipes
VersionFull System - R/S3 Platform
UPC810009933908
Part NumberMS100220
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Instructions - tl100154_mk8_charge_pipes_web.pdf

Have a question about this product?

    Load More

    2.0T EA888.4 Charge System Overview

    Turbo Outlet Hose

    The APR Turbo Outlet Hose replaces the factory rubber hose and worm-gear clamps with a high quality multi-ply silicone hose and strong Clampco T-bolt clamps. The interior of the hose is smooth and lined with a fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hose allows for a smooth connection from hose to pipe for uninterrupted airflow. We pay close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. This hose is compatible with both OEM and upgraded APR charge pipes.

    Turbo Outlet Pipe

    The APR Turbo Outlet Pipe replaces the factory plastic pipe with a high quality aluminum pipe that's a constant diameter within. We pay close attention to the airflow path and provide as few bends and tight radius turns as possible to maximize performance. Unlike the factory plastic pipes, ours won't melt and crack under extreme conditions. This piece additionally deletes the turbo muffler, which is integrated into the pipe on the Golf R/S3 and similar platform vehicles. The pipe features bead rolled connection points to help resist hose slippage, and all mounting brackets are tig-welded to the pipe for a strong connection. Finally, the pipe is finished in an attractive satin-black finish. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. These hoses are compatible with both OEM and upgraded APR charge hoses.

    Intercooler Hoses

    APR Intercooler Hoses replaces the factory rubber hoses and worm-gear clamps with a high quality multi-ply silicone hoses and strong Clampco T-bolt clamps. The interior of the hoses are smooth and lined with a fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hoses allow for a smooth connection from hose to pipe for uninterrupted airflow. We pay close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. These hoses are compatible with both OEM and upgraded APR charge pipes and intercoolers.

    Throttle Body Pipe

    The APR Throttle Body Pipe replaces the factory plastic pipe with a high quality aluminum pipe that’s a constant diameter within. We pay close attention to the airflow path and provide as few bends and tight radius turns as possible to maximize performance. Unlike the factory plastic pipes, ours won’t melt and crack under extreme conditions, and ours don’t contain a failure-prone and resistive internal piece like the factory pipe. The pipe features an additional port which can be used for an additional sensor, water/methanol injection, or however you see fit, and includes an NPT tap to block it off when not in use. The pipe features bead rolled connection points to help resist hose slippage, and all mounting brackets and billet sensor and DV recirculation ports are tig-welded to the pipe for a strong connection. Finally, the pipe is finished in an attractive satin-black finish. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. This pipe is compatible with both OEM and upgraded APR charge hoses.

    Throttle Body Hose

    The APR Throttle Body Hose replaces the factory rubber hose and worm-gear clamps with a high quality multi-ply silicone hose and strong Clampco T-bolt clamps. The interior of the hose is smooth and lined with a fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hose allows for a smooth connection from hose to pipe for uninterrupted airflow. We pay close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. This hose is compatible with both OEM and upgraded APR charge pipes.

    We Suggest

    Reviews

      Your Review

      *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.