APR

APR Ultralink For 3.0T (991.2) [INSTALL DEVICE ONLY]

3.0T H6 Engine Tune for the Porsche 911 17-19​

Install Type

Part # ECU-30T-9912-U Be the first to write a review

APR Ultralink For 3.0T (991.2) [INSTALL DEVICE ONLY]

In Stock
Free Shipping on orders over $150*
$129.95
Add to Wishlist
7

Emissions

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.

See Emissions Details
APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port, resulting in a clean and headache-free install. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!

Features:

  • Horsepower - More horsepower throughout the whole rpm band
  • Torque - More torque throughout the whole rpm band
  • Warranty - APR Plus is available, providing a factory term limit matching limited powertrain warranty
  • Stages - Multiple performance levels depending on installed hardware
  • Mode Switching - Switchable power levels and features through Porsche Normal, Sport, and Sport+ profiles
  • Flat Torque - Optional torque limited version for a flatter torque profile
  • Fuel Grades - Multiple octanes from which to choose
  • Ethanol - Ethanol support from E60-E85 for maximum performance
  • Acceleration - Accelerate faster with more power and reduced throttle lag
  • Linear Throttle - Pedal maps adjusted for a more linear feel
  • Brake Boosting - Left foot braking or brake boosting added
  • Rev Limiter - Increased redline for higher revving
  • Standing Limiter - Increased standing limiter for higher revving at idle
  • Speed Limiter - Go as fast as you want with the speed limiter out of the way
  • Auto Start/Stop Inversion - Auto Start/Stop defaults to the off position
  • Exhaust Flaps - Enhanced power delivery and drivability through recalibrated exhaust flap actuation
  • Quiet Mode - Keeps the exhaust valves closed in Normal mode, unless driving rapidly
  • Added Safety - Additional safety features and protection modes added
  • Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
  • Flash Counter - Flash counter does not increase with each flash
  • Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
  • Free Updates - Get free updates for life
  • Guarantee - 30 day money back guarantee
Brand APR
Emission Code7
Engine AspirationTurbocharged
Engine ConfigurationH6
Engine Displacement3.0L
Engine FamilyPorsche 9A2
Engine OrientationLongitudinal
Fuel TypeGasoline
Install TypeAPR Ultralink (Self Install Device Price Shown)
MarketNAR
ROW
Product TypeECU Upgrade
Part NumberECU-30T-9912-U
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Important fuel quality information
Important fuel quality information
Find your boxcode and revision
Find your boxcode and revision
APR Plus Warranty Booklet
APR Plus Warranty Booklet
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number. Please Note: Each vehicle's year, make, and model may have multiple factory engine or transmission controller software part numbers, known as box codes, each with unique revisions. Manufacturers periodically release software updates that alter this information, which can only be determined by scanning the controller and is not publicly provided. Due to the variety of codes, some stages, octane levels, features, or options may not be available for specific codes. Therefore, our website provides a general guide based on general info such as Year, Make, and Model. Our system allows you to request unavailable software, and we offer a 30-day money-back guarantee if you're not satisfied.

Have a question about this product?

    Load More

    When you buy an APR Ultralink you use it to buy and install APR software on your vehicle, from the convenience of your own home, from the Ultralink Marketplace. Alternatively, you can always go to an APR dealer and they will sell and install software for you. Below is the retail price for most of our software. Any sales or promotions will not be reflected in these prices but will be in the Ultralink Marketplace. Learn more about the Ultralink here.

    Porsche Tech Talk

    Driving Modes, Features, and Safety

    Driving Modes - Each upgrade offers a host of improvements beyond power alone. Using Porsche’s Normal, Sport, and Sport Plus modes offers varying levels of output while retaining all of the unique characteristics present in each mode. Sport and Sport plus modes give you full power and torque. Normal mode give you modest increase over stock. Optionally quiet mode is available, which keeps the exhaust valves closed in Normal mode, unless driving rapidly. Optionally a “Low Torque” file can be requested that limits torque similarly to normal mode, but retains sport mode like peak power levels. We’ve optimized boost, fueling, ignition, cams, and more to achieve greater power and torque in all scenarios.


    Features - In Sport Plus mode we’ve reduced turbo lag during reapplication of the throttle by building boost while off the throttle. We have linearized the pedal maps for a more predictable throttle response curve, which works exceptionally well on the track. We’ve enabled left foot braking, and brake boosting. The speed limiter has been removed. We’ve optimized the software to better handle larger wheels without excessive torque interventions. And finally we’ve inverted the start stop functionality so the vehicle starts with this feature disabled.


    Safety - With many customers tracking their Porsche, safety is paramount in our calibration strategy. Through the use of extreme datalogging equipment and additional sensors, thermocouples, and transducers, our engineers were able to fully optimize the ECU for advanced safety routines. This includes implementing several routines not enabled from the factory. The entire thermal management system is optimized to reduce engine bay temperature, and reduce intake air temperature, while also implementing advanced protection routines to prevent oil temperature from achieving unsafe levels. The exhaust crackles disable when temperature thresholds are crossed, and are only enabled in sport mode. Next, we help protect the engine from LSPI by preventing the engine from being lugged out in tall gears. We also protect the turbo from damaging compressor surge, and add in turboshaft overspeed protection. We’ve enabled new temperature protection routines to prevent the engine, exhaust, and other components from overheating, and have implemented temperature management strategies that are fully mindful of the platform’s limited fueling capabilities. We’ve optimized the injection strategy to not only deliver a fatter torque curve and better spool, but to reduce the chances of knock, and torque dips. This is also achieved alongside per cylinder ignition advance and fuel trimming.

    APR ECU Upgrade Stages

    Our ECU Upgrades are available in multiple configurations. Installation of additional performance hardware, such as an intercooler or intake systems, may provide further performance improvements.

    APR Stage 1

    The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to 454-501 HP and 439-523 FT-LBS of torque with gains as high as +102-155 HP and +111-195 FT-LBS of torque at the wheels. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.


    APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.


    Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor. Before using Ethanol, educate yourself and follow our switching guide.

    APR Plus

    APR Plus is our APR Stage 1 ECU Upgrade with our limited powertrain warranty and it’s the first step towards tuning your engine. It produces up to 545 HP and 439 FT-LBS of torque with gains as high as +102 HP and +111 FT-LBS of torque at the wheels. Please check our warranty manual to understand modifications supported by APR Plus.

    APR Stage 3 (GTS)

    The APR Stage 3 ECU Upgrade is the next step towards tuning your engine. It produces up to 520-615 HP and 524-594 FT-LBS of torque with gains as high as +152-228 HP and +196-266 FT-LBS of torque at the wheels, and with additional cooling it produces up to 565-648 HP and 548-594 FT-LBS of torque with gains as high as +185-262 HP and +220-266 FT-LBS of torque at the wheels. Use this tune with the Porsche Carrera GTS turbochargers. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.  


    APR Stage 3 GTS is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.


    Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor. Before using Ethanol, educate yourself and follow our switching guide.

    Horsepower and Torque Dyno Charts

    Select a DynoSelect a Dyno Type