- Home /
- Software & Tuning /
- Engine ECU Upgrade /
- Gasoline ECU Upgrades /
- 6 Cylinder Engine ECU Upgrades /
- 3.0T EA839 ECU Upgrades /
- APR Ultralink for 3.0T EA839 V6 (D5) (A8) [INSTALL DEVICE ONLY]
APR Ultralink for 3.0T EA839 V6 (D5) (A8) [INSTALL DEVICE ONLY]
3.0T V6 Engine Tune for the Audi A8 Quattro 19-24
Install Type
APR Ultralink for 3.0T EA839 V6 (D5) (A8) [INSTALL DEVICE ONLY]
3.0T V6 Engine Tune for the Audi A8 Quattro 19-24
Features:
- Delivers up to 384 HP with 499 FT-LBS depending on octane (APR Plus)
- Delivers up to 384-435 HP with 499-557 FT-LBS depending on octane (Stage 1)
- Max gains of +86 AWHP and +137 AWFT-LBS depending on octane (APR Plus)
- Max gains of +86-131 AWHP and +137-195 AWFT-LBS depending on octane (APR Stage 1)
- Supports 91 AKI, 93 AKI, 100 AKI, and 104 AKI fuel grades in North America and 95 RON, 98 RON, 104 RON, and 108 RON in the rest of the world
- Optional factory term limit matching limited powertrain warranty with APR Plus
- Standing RPM soft limiter increased
- Left-foot braking / brake boosting added
- Properly rescaled performance gauges
- Optimized launch control strategy for faster response and boost building
- Optimized driveline protection during launch
- Optimized thermal management and additional protection
- Optimized high-gear LSPI protection and turbocharger protection added
- Speed limiter removed
- Exhaust crackle added while retaining temperature safeties
- Auto start-stop defaults to the off position
- No hardware required (Software only)
- Supports standard bolt on modifications
- Eliminated the need for a TCU upgrade to achieve full torque
- Flash counter does not increase with each flash
- Free lifetime updates
- Direct OBDII port flash (No ECU removal)
- 30 day money back guarantee
Brand | APR |
---|---|
Engine Aspiration | Turbocharged |
Engine Configuration | V6 |
Engine Displacement | 3.0L |
Engine Family | EA839 |
Engine Orientation | Longitudinal |
Fuel Type | Gasoline |
Install Type | APR Ultralink - Tune from Home |
Market | NAR |
ROW | |
Product Type | ECU Upgrade |
Part Number | ECU-30T-EA839-D5-U |
Important fuel quality information
Find your boxcode and revision
APR Plus Warranty Booklet
Select VW/Audi MG1 under unlock type
Have a question about this product?
When you buy an APR Ultralink you use it to buy and install APR software on your vehicle, from the convenience of your own home, from the Ultralink Marketplace. Alternatively, you can always go to an APR dealer and they will sell and install software for you. Below is the retail price for most of our software. Any sales or promotions will not be reflected in these prices but will be in the Ultralink Marketplace. Learn more about the Ultralink here.
APR ECU Upgrade Stages
Our new suite of MG1 ECU software comes after months of extensive research and development that is typically absent from the aftermarket. Our upgrade makes the engine more powerful and more exciting. We’ve extensively calibrated the system to work flawlessly on the track, while retaining safety routines to protect your engine in the most demanding scenarios. This was all made possible by our engineering team's pursuit of perfection. Development vehicles were outfitted with additional sensors, including turbo shaft speed sensors, thermocouples, transducers, and more, along with our high speed direct RAM logging equipment, to feed valuable data to the team for analysis. After thousands of hours of testing and tuning we created new calibrations that are fine tuned for several octanes and contain hundreds of map changes, with a vast array of safety features built in.
The result of this work is nothing short of astounding. Not only have we increase power, we’ve added many safety routines to ensure the engine and components are protected under demanding scenarios. Additionally we’ve added features to enhance the driving experience.
We’ve recalibrated the exhaust flaps to reduce backpressure and create consistent turbo spool characteristics. Sound characteristics are improved too, especially during free-rev, which sees its limiter raise in park and neutral. We’ve added a feature to enable exhaust crackle, which mimics much of the behavior of the RS models without being over-the-top and obnoxious. This enables during free-rev, downshifts, and lifting off the throttle. It’s optimized and includes safety routines to ensure component protection. Through proper torque management and ECU code changes, we’ve removed the requirement of a transmission tune to achieve full torque. We’ve optimized launch control for a better take-off and enabled boost building on the line. Additionally we’ve defaulted the start-stop feature to the off position, removed the speed limiter, added left-foot braking or brake-boosting, and configured the ECU to send the correct calibration to the dash for the performance gauges.
To protect the engine and components we’ve spent a considerable amount of time tuning safety routines, some of which were not active from the factory. The ECU will protect the engine should the exhaust flaps fail as back pressure becomes too high. The optional exhaust crackle feature will turn off should components get too hot. The engine has advanced LSPI protection to prevent the engine from damage when being lugged in the tallest gears. Excessive intake air temperature, which is common on a dynamometer, will cause power to reduce to protect the engine. Furthermore more we’ve added and calibrated protection routines for turbocharger pressure ratios, shaft speed, exhaust pressure, intake air temperature, coolant temperature, oil temperature, lambda, fueling system limitations, and more. All of this and more gives us confidence to offer an optional limited powertrain warranty through APR Plus!
Our ECU Upgrades are available in multiple configurations. Installation of additional performance hardware, such as an intercooler or intake systems, may provide further performance improvements.
APR Stage 1
The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to 384-435 HP and 499-557 FT-LBS of torque with gains as high as +86-144 HP and +137-214 FT-LBS of torque at the wheels.
APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, and 104 AKI in North America and 95 RON, 98 RON, 104 RON, and 108 RON in the rest of the world.
APR Plus
APR Plus is our APR Stage 1 ECU Upgrade with our limited powertrain warranty and it’s the first step towards tuning your engine. It produces up to 384 HP and 499 FT-LBS of torque with gains as high as +86 HP and +137 FT-LBS of torque at the wheels. Please check our warranty manual to understand modifications supported by APR Plus.
Horsepower and Torque Dyno Charts
Select a Dyno | Select a Dyno Type |
---|---|
APR Calibration Report
Stage | HP | TQ | Max Gain | Max Gain |
---|---|---|---|---|
Stock As Reported by Audi | 335 HP | 369 FT-LBS | ||
Stock As Measured by APR | 349 HP | 373 FT-LBS | ||
APR Plus | ||||
91 AKI / 95 RON | 384 HP | 499 FT-LBS | +86 HP | +137 FT-LBS |
Stage 1 | ||||
91 AKI / 95 RON | 384 HP | 499 FT-LBS | +86 HP | +137 FT-LBS |
93 AKI / 98 RON | 401 HP | 517 FT-LBS | +97 HP | +155 FT-LBS |
100 AKI / 104 RON | 422 HP | 535 FT-LBS | +118 HP | +172 FT-LBS |
104 AKI / 108 RON | 435 HP | 557 FT-LBS | +131 HP | +195 FT-LBS |
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
The APR Difference
Who we are - We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!
What we do - We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.
How we differ - With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!
APR Software Pricing Guide
Our performance software upgrade is available in multiple stages with optional features.
APR Plus (USA/Canada) | |
---|---|
APR Stage 1 ECU Upgrade | $1,799.95 |
APR Stage 1 | |
APR Stage 1 ECU Upgrade | $899.95 |
APR Stage 1 ECU Upgrade from APR Plus | FREE |
Purchasing, Guarantee, and Updates
Purchasing Options¹:
- Do-it-yourself: Purchase an APR Ultralink to connect your vehicle to the Ultralink Marketplace where you can shop, configure, and install APR software!†
- Do-it-for-me: Locate an APR Dealer and at their location they will sell and install APR software.
Money-Back Guarantee: Try our Software Upgrades for up to 30 days, risk free! If you are not satisfied, have it removed and refunded.²
Free Updates: If we make an update, add a standard feature, or if the manufacturer issues an update, you are entitled to a free update.³
1. Availability: APR Software may not be available for all vehicles. Stages, programs, and features may not be available for all ECUs.
2. Money Back Guarantee: Excludes some Software Upgrades, such as those included with a hardware purchase. Labor charges are at the discretion of the installer.
3. Free updates: Subject to availability. Labor charges are at the discretion of the installer. Applicable to the original purchaser. Second hand owners may inquire with an APR Dealer about a software license transfer fee.
†. Excludes APR Plus. Excludes some platforms. Dealer participation will vary. Visit our product page for details.
Be the first to write a review
Your Review
- 1
- 1
*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.