APR

APR Ultralink for 2.9T EA829 V6 (9Y) (Cayenne S) [INSTALL DEVICE ONLY]

2.9T V6 Engine Tune for the Porsche Cayenne 19-21

Install Type

Part # ECU-29T-EA839-9Y-U Be the first to write a review

APR Ultralink for 2.9T EA829 V6 (9Y) (Cayenne S) [INSTALL DEVICE ONLY]

In Stock
Free Shipping*
$129.95
Add to Wishlist
We're excited to announce our Engine Control Unit (ECU) Upgrades are now available for the Porsche Cayenne S and S Coupe (9Y) 2.9 TFSI engine with the Bosch MG1 ECU! Expect massive gains with up to 484-538 HP and 521-590 FT-LBS of torque on tap, depending on octane, from this simple software upgrade. APR's ECU Upgrades are the best dollar-per-horsepower modification one can make to improve engine performance. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possible through APR's optimization of the factory engine management system to take full advantage of the engine's capabilities, without needing any end user adjustment. The ECU Upgrades are available with various features and supported octane levels and each stage is compatible with most typical bolt-on modifications. The software is installed to the vehicle's factory ECU through the OBD-II port once the ECU is unlocked, resulting in a clean and headache-free install. Furthermore, for those looking for tuning with a limited powertrain warranty, APR Plus has you covered!

Features:

  • Delivers up to 484-538 HP with 521-590 FT-LBS depending on octane
  • Max gains of +80-135 AWHP and +108-179 AWFT-LBS depending on octane
  • Supports 91 AKI, 93 AKI, 100 AKI, and 104 AKI fuel grades in North America and 95 RON, 98 RON, 104 RON, and 108 RON in the rest of the world
  • Optional factory term limit matching limited powertrain warranty with APR Plus
  • Quicker acceleration
  • Speed limiter removed
  • Standing RPM soft limiter increased
  • Left-foot braking / brake boosting added
  • Properly rescaled performance gauges
  • Optimized thermal management and protection
  • Optimized launch control strategy for faster response
  • Optimized driveline protection during launch
  • Optional exhaust crackle in sport mode (Similar to sportier models)
  • No hardware required (Software only)
  • Supports standard bolt on modifications
  • Eliminated the need for a TCU upgrade to achieve full torque
  • Flash counter does not increase with each flash
  • Free lifetime updates
  • Direct OBDII port flash (No ECU removal)
  • 30 day money back guarantee
Brand APR
Engine AspirationTurbocharged
Engine ConfigurationV6
Engine Displacement2.9L
Engine FamilyEA839
Engine OrientationLongitudinal
Fuel TypeGasoline
Install TypeAPR Ultralink - Tune from Home
MarketNAR
ROW
Product TypeECU Upgrade
Part NumberECU-29T-EA839-9Y-U
Important fuel quality information
Important fuel quality information
Find your boxcode and revision
Find your boxcode and revision
APR Plus Warranty Booklet
APR Plus Warranty Booklet
ECU Order Form
Select VW/Audi MG1 under unlock type
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number. Please Note: Each vehicle's year, make, and model may have multiple factory engine or transmission controller software part numbers, known as box codes, each with unique revisions. Manufacturers periodically release software updates that alter this information, which can only be determined by scanning the controller and is not publicly provided. Due to the variety of codes, some stages, octane levels, features, or options may not be available for specific codes. Therefore, our website provides a general guide based on general info such as Year, Make, and Model. Our system allows you to request unavailable software, and we offer a 30-day money-back guarantee if you're not satisfied.

Have a question about this product?

    Load More

    When you buy an APR Ultralink you use it to buy and install APR software on your vehicle, from the convenience of your own home, from the Ultralink Marketplace. Alternatively, you can always go to an APR dealer and they will sell and install software for you. Below is the retail price for most of our software. Any sales or promotions will not be reflected in these prices but will be in the Ultralink Marketplace. Learn more about the Ultralink here.

    APR ECU Upgrade Stages

    Our new suite of MG1 ECU software comes after months of extensive research and development that is typically absent from the aftermarket. Our upgrade makes the engine more powerful and more exciting. We’ve extensively calibrated the system to work flawlessly on the track, while retaining safety routines to protect your engine in the most demanding scenarios. This was all made possible by our engineering team's pursuit of perfection. Development vehicles were outfitted with additional sensors, including turbo shaft speed sensors, thermocouples, transducers, and more, along with our high speed direct RAM logging equipment, to feed valuable data to the team for analysis. After thousands of hours of testing and tuning we created new calibrations that are fine tuned for several octanes and contain hundreds of map changes, with a vast array of safety features built in.


    Our ECU Upgrades are available in multiple configurations. Installation of additional performance hardware, such as an intercooler or intake systems, may provide further performance improvements.

    APR Stage 1

    The APR Stage 1 ECU Upgrade is the first step towards tuning your engine. It produces up to 484-538 HP and 521-590 FT-LBS of torque with gains as high as +80-135 HP and +108-179 FT-LBS of torque at the wheels.


    APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI and 104 AKI in North America and 95 RON, 98 RON, 104 RON, and 108 RON in the rest of the world.

    APR Plus

    APR Plus is our APR Stage 1 ECU Upgrade with our limited powertrain warranty and it’s the first step towards tuning your engine. It produces up to 484 HP and 521 FT-LBS of torque with gains as high as +80 HP and +108 FT-LBS of torque at the wheels. Please check our warranty manual to understand modifications supported by APR Plus.

    Horsepower and Torque Dyno Charts

    Select a DynoSelect a Dyno Type

    APR Calibration Report

    StageHPTQMax GainMax Gain
    Stock As Reported by Porsche 434 HP405 FT-LBS
    Stock As Measured by APR 442 HP 419 FT-LBS
    APR Plus
    91 AKI / 95 RON484 HP 521 FT-LBS +80 HP +108 FT-LBS
    Stage 1
    91 AKI / 95 RON484 HP 521 FT-LBS +80 HP +108 FT-LBS
    93 AKI / 98 RON502 HP 545 FT-LBS +99 HP +133 FT-LBS
    100 AKI / 104 RON526 HP 576 FT-LBS +124 HP +165 FT-LBS
    104 AKI / 108 RON538 HP 590 FT-LBS +135  HP +179 FT-LBS
    Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.

    The APR Difference

    Who we are - We’re a global automotive engineering firm nestled in Opelika, Alabama. Our 80,000ft² state-of-the-art facility is home to some of the best engineers in the industry, who have mastered hundreds of engine management systems. We have multiple engine and chassis dynos, and the resources necessary to create our ECU Upgrades in-house, from the ground up! We're not a new company either. We've been around since the 90's and we have a strong financial backing to ensure we'll be here to support you for decades to come!


    What we do - We optimize everything to make your engine more powerful. We adjust air-fuel ratios, advance ignition, increase boost pressure, alter cam positions and lift profiles, and more, all depending on the type of engine and management system, of course! We don’t take shortcuts, and we don’t take risks. We do it the right way.


    How we differ - With our proprietary calibration and direct ram access data logging tools and operating system code changes, we’re able to make some of the strongest and fastest ECU upgrades, without needing costly end user adjustments. We work with the ECUs intelligent modeling and closed-loop systems, and beta test in multiple environments to create upgrades that work no matter where you drive!

    APR Software Pricing Guide

    Our performance software upgrade is available in multiple stages with optional features.

    APR Plus (USA/Canada)
    APR Stage 1 ECU Upgrade$1,799.95
    APR Stage 1
    APR Stage 1 ECU Upgrade$899.95
    APR Stage 1 ECU Upgrade from APR PlusFREE

    Purchasing, Guarantee, and Updates

    Purchasing Options¹:


    1. Do-it-yourself: Purchase an APR Ultralink to connect your vehicle to the Ultralink Marketplace where you can shop, configure, and install APR software!†
    2. Do-it-for-me: Locate an APR Dealer and at their location they will sell and install APR software.


    Money-Back Guarantee: Try our Software Upgrades for up to 30 days, risk free! If you are not satisfied, have it removed and refunded.²


    Free Updates: If we make an update, add a standard feature, or if the manufacturer issues an update, you are entitled to a free update.³


    1. Availability: APR Software may not be available for all vehicles. Stages, programs, and features may not be available for all ECUs.
    2. Money Back Guarantee: Excludes some Software Upgrades, such as those included with a hardware purchase. Labor charges are at the discretion of the installer.
    3. Free updates: Subject to availability. Labor charges are at the discretion of the installer. Applicable to the original purchaser. Second hand owners may inquire with an APR Dealer about a software license transfer fee.
    †. Excludes APR Plus. Excludes some platforms. Dealer participation will vary. Visit our product page for details.
    Reviews

      Your Review

      *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.