APR

APR Roll-Control Sway Bar - Rear - (AWD MQB/MQB EVO Haldex)

Fits Audi A3 Quattro 22-25, S3 15-24, TT Quattro 16-23, TTS Quattro 16-23; VW Golf Alltrack 17-19, Golf R 15-19, Golf Sportwagen 17-19; AWD; Haldex

Version

Part # SUS00036 Be the first to write a review

APR Roll-Control Sway Bar - Rear - (AWD MQB/MQB EVO Haldex)

In Stock
Free Shipping*
MSRP $281.95
$224.96
Save $56.99 (20%)
Add to Wishlist
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
APR Roll-Control Sway Bars are engineered to significantly improve cornering performance by reducing vehicle body roll without greatly impacting comfort. Drivers who enjoy a more spirited driving style often encounter excessive body roll, which negatively impacts handling. During cornering, the vehicle’s body leans to the opposite side, shifting weight primarily to the outside tires. This uneven distribution reduces grip on the inner tires, resulting in decreased overall traction and stability. Our solution? APR Sway Bars are fine-tuned with an optimized spring rate achieved through increased bar diameter and strategic placement of end-link mounting points forged from a single bar. Additionally, we upgrade the bushings to high-performance polyurethane, eliminating bar movement and compression during hard turns, ensuring consistent and enhanced performance. APR Sway Bars are designed as a direct replacement for your factory-installed bars. Simply swap out the original bars with our upgraded sway bars to experience improved handling immediately. Whether referred to as stabilizer bars, anti-roll bars (ARB), or sway bars (FSB/RSB), APR’s bars deliver superior cornering control and driving confidence. Getting Technical: APR Sway Bars are constructed from high-tensile strength steel, known for its excellent durability properties. To reduce weight without compromising strength, these bars are hollow. Each bar is precision CNC-bent from a single piece of bar stock, eliminating welds and significantly reducing the risk of failure compared to traditional manufacturing methods. The bar ends are forged into shape and then quench-hardened in specialized fixtures to achieve the highest strength profile possible, and then dimensionally confirmed in final check fixtures. Lastly, each sway bar is coated with a corrosion-resistant red powder coat, offering both durability and a sleek appearance. On this particular model, we’ve increased the bar diameter to 25 mm, with a 5 mm wall thickness, an upgrade from the factory’s 21.9x3.7 mm size. This enhancement results in a spring rate of 611 lbs/in on the soft setting and 697 lbs/in on the stiffer setting, delivering a 71%/95% increase over the factory MK7 Golf R bar. These changes translate to significantly improved handling, reduced body roll, and a more responsive driving experience. Optimize your vehicle’s performance with APR’s precision-engineered sway bars for superior strength and reliability.

Features:

  • Enhanced Cornering Performance: Reduces vehicle body roll, improving balance and stability during sharp turns.
  • Comfort Retained: Optimized for spirited driving without sacrificing daily comfort, offering the perfect blend of performance and ride quality.
  • Improved Weight Distribution: Minimizes the shift of weight to outer tires, increasing grip and traction on inner tires during cornering.
  • High-Tensile Strength Steel: Constructed from extremely durable materials designed for demanding conditions, ensuring long-lasting performance.
  • Hollow Bar Design: Reduces weight without compromising strength, enhancing overall vehicle performance.
  • CNC-Bent Precision: Manufactured from a single bar of steel with no welds, increasing reliability and minimizing the risk of failure.
  • Forge-Pressed and Quench-Hardened: Bar ends are forge-pressed and heat-treated to achieve maximum strength and durability.
  • Corrosion-Resistant Finish: Coated with an anti-corrosive red powder coat, ensuring longevity and a sleek, polished appearance.
  • Increased Bar Diameter: Upgraded to a larger diameter with enhanced wall thickness for improved stiffness and roll resistance.
  • Adjustable Spring Rate: Offers multiple stiffness settings to customize handling, with substantial increases over the factory sway bars.
  • Direct Replacement: Easy, plug-and-play installation without the need for modifications.
Adjustability Sittings2
AdjustableYes
Bar TypeHollow
Brand APR
Bushing MaterialPolyurethane
Bushings IncludedYes
ColorRed
Diameter25 MM
DrivetrainAll Wheel Drive
Emission Code5
LocationRear
PlatformMQB/MQB EVO
Product TypeStabilizer Bar
Rear DifferentialHaldex
Spring Rate (APR)611 LBS/in (Soft) / 697 LBS/in (Stiff)
Spring Rate (OEM)358 LBS/in (MK7 R)
Spring Rate Increase71%/95% (MK7 R)
Stock Bar Dimensions21.9x3.7mm (MK7 R)
VersionRear, AWD, Non-RS Haldex
Wall Thickness5 MM
UPC810065217899
Part NumberSUS00036
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Please Note: Designed for all wheel drive (AWD) vehicles with the standard haldex unit (Non-RS/22+ R/25+ S3).
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.