The APR Catback Exhaust Suite is Here!
The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout. Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3” to dual 2.5” rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle.
Mid-Muffled and Non-Muffled Systems Available!
Quick Facts
- T304 stainless-steel construction
- Argon-back-purged TIG welding throughout
- Single 3" to dual 2.5" mandrel-bent brushed tubing
- Ultra-smooth cast 3" to dual 2.5" splitter
- Brushed-finished mufflers with optional easy-change center unit for sound customization
- Polished 4" slash-cut exhaust tips (removable)
- Rugged and precise mounting brackets
- OEM style slip clamps and Torca AccuSeal T304 tip clamps
- Direct Fit
- Low-profile design, suitable for lowered vehicles
- Larger diameter piping compared to stock
- Larger diameter tips compared to stock
- Lighter weight, in all configurations, compared to stock
- In-house design with world-class manufacturing and quality control
- Easy to install
System Overview
Our exhaust system uses larger piping compared to the factory exhaust system, yet weights 5 lbs. less and 1 lb. less with the optional front muffler. We use 3" OD piping, which then splits to a dual 2.5" design. The factory system uses 2.56" piping, which reduces to 2.36" before splitting, greatly diminishing the overall diameter of the system. Finally, our system’s 4" exhaust tips dwarf the factory 3.15" tips, giving the rear of the vehicle a sportier look.
Mid Muffler
The mufflers are responsible for tuning the exhaust note and do so without adding unnecessary restrictions to the system. Each unit features a straight-through perforated tube that’s tightly wrapped with stainless steel and fiberglass material. The mufflers have a beautiful brushed finish, and are tucked high in the exhaust tunnel, making them perfect for lowered vehicles.
Optional Front Muffler
The system comes standard with a single muffler with the option of adding our front triangular muffler at any time. The system sounds deep, throaty, and devoid of rasp and drone in all configurations. The single muffler setup will be perfect for most customers, especially those with the factory setup. When upgrading more the system gets louder. For those who want it quieter, our drop-in front muffler makes for an excellent upgrade.
Axle-Back Components
We cast the axle-back splitter to maximize the system’s performance by keeping exhaust velocity high and back pressure low. This is accomplished by gradually splitting the system from a single 3” pipe to dual 2.5” pipes. The organically shaped casting allows us to make this transition gradually as to not disturb the flow of gasses. Furthermore, as this component is visible from the rear of the vehicle, we made sure form matched function with a beautiful surface finish, TIG welding, unique bracketry and brushed, mandrel bent tubing.
Brackets
Our brackets ensure a strong and precise fit, every time. With our design, you’ll never need to worry about the brackets sagging and losing their shape over time, or the post slipping out of the hangers. The brackets are rigid, exact in their position, fit snugly in place and are made to stand the test of time.
Tubing and Welds
We use T304 stainless steel tubing throughout. We brush and de-burr all pipes, use mandrel bending techniques to ensure the pipes keep a constant diameter throughout, and use argon-back purged TIG welding for a strong and attractive weld.
Tips
Our polished slash-cut 4” exhaust tips upgrade the rear of the vehicle dramatically. The motorsport-inspired tips tuck nicely into the factory valance, gently following the valance’s curves and demanding all the right attention in all the right places. We laser etch a small and discreet APR logo onto the top of each tip, and we use T304 stainless Torca AccuSeal clamps that bolt on with ease with hardware that rotates out of sight. Lastly, since the tips are removable, you can upgrade to any one of our optional tip designs at any time.
Explore Our Optional Tips
Clamps
Our system uses OEM-style low-profile slip clamps and T304 stainless-steel Torca AccuSeal clamps for the exhaust tips. Our clamp selection allows the system to sit high in the exhaust tunnel, as is favored by lowered vehicles, with ultimate compatibility no matter what midpipe you may have. The clamps make for easy swapping of the exhaust tips, and slide out of the way to make adding or components. Each connection point is strategically placed to ensure the system has minimal opportunity to rotate during install or during years of heavy driving. Finally, because there are no flanges or swedges on the pipe, fitting the system to the factory midpipe or others is a breeze. There’s no cutting, welding, or glaring compatibility issues, and there are no gaskets to replace.
Hanger
We’ve added an extra bracket and associated rubber hanger to our main muffler to make use of an unused factory mounting point. This ensures the system installs snugly in place, without an opportunity to move, or rotate, under prolonged use.
Compatibility
We’ve designed our system to be 100% bolt-on. There’s no cutting, welding, or finagling to get the system to fit. It simply bolts on thanks to the included reducer for use with the factory midpipe, and link pipe for use with a 3" midpipe.
APR Catback (Setup 1)
APR Catback (Setup 2)
APR Catback with Optional Front Muffler (Setup 1)
APR Catback with Optional Front Muffler (Setup 2)
- Filter
- Clear
- 1
Back To Top