APR Oil Catch Can for the MK6 Golf R!
Keeps intake tract cleaner
Drains in seconds
Easy to install
500+ APR Dealers World-Wide
APR is pleased to present the ultimate Oil Catch Can System for the MK6 Golf R!
The APR Oil Catch Can System replaces the failure prone factory positive crank ventilation (PCV) system and traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a common performance robbing boost leak, while reducing carbon buildup on intake valves, octane lowering oil vapors and oil pooling within the intake tract. It’s a simple modification to install, drains in seconds with the flick of a knob, and is recommended at all stages of performance.
- Increases performance
Increases performance by eliminating a common boost leak, and reducing octane lowering oil vapors and airflow restricting carbon buildup.
- Eliminates a boost leak
The PCV block-off plate eliminates the failure prone factory PCV valve.
- Catches oil and gunk
Oil and gunk pools in the can, not in the intercooler piping.
- Easy to drain
A simple knob allows the system to drain in seconds without any tools.
- Easy to install
Installs in minutes. The hoses pop right on without tools thanks to the OEM Norma fittings.
- Easy to maintain
Yearly maintenance is a snap thanks to the two-piece billet design.
- High-quality hoses
Resist oil degradation, kinks, abrasion, and blockage from freezing, with an OEM look.
- High-quality can, plate and bracket
Strong, clean and attractive billet-aluminum and stainless steel parts look right at home in the engine bay.
An engine produces extreme pressures within its cylinders during operation and some ultimately slips by the piston rings and pressurizes the engine’s crankcase. This is exacerbated when increasing horsepower and driving harder. To relieve the pressure, the engine uses a failure prone PCV system that dumps the pressure, along with oil vapors, back into the intake tract to be consumed by the engine. Unfortunately, this results in the following performance robbing scenarios:
- Oil vapors mix with the air/fuel mixture, which reduces octane and hurts performance.
- Carbon builds up on the back of intake valves, which reduces airflow and hurts performance.
- Messy oil pools in the intake tract and coats the intercooler, leading to hose degradation, and reduced IC effectiveness.
- The factory PCV system can fail, creating a massive boost leak that directly pressurizes the crankcase.
The APR Oil Catch Can System eliminates the factory PCV valve with a billet-aluminum block-off plate. The plate routes crankcase gasses through the APR catch can, which filters oil vapors through a track-proven four-staged baffling system. The vapors pool in the bottom of the can, while the rest of the pressure is diverted back to the intake tract where it’s burned off by the engine.
The result is simple:
- A cleaner engine
- Better performance
- Elimination of a common failure point
|VW||MK6 Golf R||North American (NAR) Market||2.0 TSI (EA113)||MS100124||$499.99||Buy one Now!|
|VW||MK6 Golf R / ED35||Rest of World (ROW) Market||2.0 TSI (EA113)||MS100117||$499.99||Buy one Now!|