APR Presents: 2011/2012 2.0 TSI ECU Upgrades (CC/Passat/Tiguan/Eos/Jetta/GLI/Beetle)

10/18/2011
10 min read

APR Presents: 2011/2012 2.0 TSI ECU Upgrades (CC/Passat/Tiguan/Eos/Jetta/GLI/Beetle)

10/18/2011
10 min read

APR is pleased to announce 2011/2012 Model Year 2.0 TSI ECU Upgrades are now available for the Jetta, GLI, Passat, CC, Tiguan, Beetle and Eos! Delivering 254 HP and 303 TQ with an APR Stage I Upgrade and over 400 HP with an APR Stage III Turbocharger System, APR customers can experience the same power levels previous model year customers have enjoyed for years.


In late 2010, VW began delivering several 2011 Model Year vehicles with Bosch’s MED 17.5.2 ECU featuring a new Infineon Tri-Core 1767 processor. Launching a new processor type requires the expertise of APR’s Electrical Engineers to fully dissect, reverse engineer and gain a deep intimate knowledge of the new architecture before software development can begin.


Earlier this year, APR acquired all new MK6 Jetta to showcase the awesome potential of the 2.0 TSI engine. Upon delivery in May, APR found the Jetta was equipped with the new MED 17.5.2 ECU and required extensive development to meet expectations of an early delivery at Waterfest, 2011. With months of R&D previously dedicated to the new ECU, APR was able to write software and engineer a 500 HP 2.0 TSI APR Stage 4 Engine Package, completing this seemingly impossible project before the GLI had even been released to the North American market.


jetta-mk6-stage4


APR’s Electrical Engineers were then tasked with creating tools necessary for any APR Dealer to flash the ECU in a convenient manner. APR has continued to reinvest in human capital and as the Engineering department continues to grow, development of new ECU types should be available at a more rapid rate in the future.


APR’s forthcoming Universal Programming Device will allow APR Dealers to flash a multitude of ECU makes and models in house without sending customer ECUs to APR’s HQ. APR anticipates dealer flashing by December 2011. While development of this tool continues, ECUs can be sent directly to APR’s HQ for upgrading using the APR ECU Order Form. For those unfamiliar with removing and mailing an ECU, please review APR’s various ECU removal guides or visit one of our many APR Dealers for assistance. Depending on the ECU, please allow a one to two business day turn around.


ECU Software is now available for the following vehicles:


2011-2012 – CC – 2.0 TSI
cc.png


2011-2012 – Passat – 2.0 TSI
passat.png


2011-2012 – Tiguan – 2.0 TSI
tiguan.png


2011-2012 – Jetta – 2.0 TSI
jetta.png


2012 – Jetta GLI – 2.0 TSI
gli.png


2011-2012 – Eos – 2.0 TSI
eos.png


2012 – The Beetle – 2.0 TSI
beetle.png


All other existing 2.0 TSI ECU upgrades are still available at APR dealers around the world.


APR has the following stages available with APR’s Patented EMCS Programs Switching features:


APR Stage I
For use on a completely stock vehicle, or with light bolt on modifications.


20_tsi_trans_s1_in_93_cc.gif


APR Stage II
For use with a high flow exhaust system and other bolt on modifications.


20_tsi_trans_s2_in_tbe_93_cc.gif


APR K04 Turbocharger System
Included with purchase of our APR K04 Turbocharger System.


20_tsi_trans_k04_vs_stock_93_cc.gif


APR Stage III Turbocharger System
Included with purchase of our APR Stage III Turbocharger System.


20tsi_trans_stage3_93_crank.gif


Thank you and Go APR!

generic

1349 Posts